Inter Ultra 2 Hard Antifouling Paint Non Ablative Black 4 Litre

No longer just extra strong, non ablative historic type antifoul a new, improved formula makes this superior antifouling ultra strong.It provides a smoother, harder, more slippery surface which deters fouling attachment for a clean, slick hull. It is ideal for high-speed crafts or craft on drying moorings. Can be burnished. Contains Biolux which is EXCLUSIVELY available in antifoulings from International. Biolux is a unique antifouling technology developed by International. It consists of a system of organic boosting biocides incorporated in a highly effective controlled release film.

Best antifoul for tidal Moorings

Features:

• A high strength, hard, scrubbable, cuprous oxide based antifouling
• Uses Biolux® Technology to block slime and algae growth
• For use on fiberglass, wood and primed underwater metals (except aluminum)
• High strength, hard antifouling
• Easy application
• Quick drying

Specifications:

• Products Theoretical Coverage: ~ 9.0 m²/lt using applications tools such as brush or roller
• Actual Coverage For This Sized Product: 36.00 mt²
• Area: Below the Waterline
• Finish/sheen: Matt
• Colour: Black
• Size: 4 Litre
• Substrates: GRP, Lead, Steel/Iron, Wood
• Application Tools: Brush, Roller, Airless Spray*, Airmix* (* FOR PROFESSIONAL USE ONLY)

Preperation and Application Conditions:

• Ensure you are in a safe working enviroment with proper ventillation and safety/protective gear on your persons
• Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation
• The film formation may be adversely affected by light rain, high humidity and/or condensation during application
• In confined spaces provide adequate ventilation during application and drying
• In Good Condition Rinse with fresh water and allow to dry. If old antifouling is incompatible or unknown, seal with
  suitable International Paint barrier/sealer coat.
• In Poor Condition Remove all loosely adhering and flaking material, feather back all edges and sand all areas. Areas
  taken back to substrate should be treated as for new work. If old antifouling is incompatible or unknown, seal with
  suitable International Paint barrier/sealer coat
• Any following application methods will depend on what substrate Ultra Hard Antifoul is applied to - Refer to the Product Data Sheet linked below for exact application methods
  

Touch Dry - Time/Temp:
20 mins - 35°C (95°F)
30 mins - 23°C (73°F)
45 mins - 15°C (59°F) 
1 hrs - 5°C (41°F)

The product data provided above is intended as a general overview to aid product selection and as such represents typical values.
For more specific application guidance and/or safety related information and procedures, please refer to the product datasheets provided:

Product data sheet:
https://s3-eu-west-1.amazonaws.com/akzonobel-live/documents/TDS/Interspeed_Ultra_2_eng_A4_20160118.pdf?mtime=20170914095538

Safety data sheet:
https://s3-eu-west-1.amazonaws.com/akzonobel-live/documents/msds/YBC754_0010eu_GB_EN_20150917_1.pdf?mtime=20170914095604