An excellent, easy to apply slip-resistant finish for decks.
Interdeck is a single pack slip resistant coating whose tough polyurethane resins give great protection against wear and tear. A durable slip-resistant finisih giving sure-footed and hard wearing protection to all deck surface. Resists sun and saltwater spray. Interdeck contains a fine aggregate that will apply easily on all substrates.
Colours match Brightside shades. Above water use.
PRODUCT DESCRIPTION:
Interdeck provides an excellent slip resistant finish. It contains a fine aggregate and will apply easily on all substrates.
* Low sheen finish prevents dazzling reflected sunlight off decks
* Easy application
* Available in a range of colours
The tough polyurethane resin protects decks against everyday wear and tear. Enamel.
PRODUCT INFORMATION:
Finish- Low sheen
Specific Gravity- 1.4
Volume Solids- 54%
Typical Shelf Life- 2 yrs
VOC (As Supplied)- 357 g/lt
Drying-Walkon/Touch Dry:
5ºC: 4 days/5 hours
15ºC: 3 days/4 hours
23ºC: 2 days/3 hours
35ºC: 1 day/2 hours
Overcoating Substrate Temperature -Overcoated by Interdeck:
5ºC: Min 24hrs/Max 4days
15ºC: Min 20hrs/Max 3days
23ºC: Min 16hrs/Max 2days
35ºC: Min 12hrs/Max 1day
APPLICATION AND USE:
Preparation-
Sound Painted Surfaces: Thoroughly degrease with International Surface Prep then rinse with fresh water. Allow to dry. Abrade thoroughly with 280-320 grade paper as a minimum. Apply one coat of Pre-Kote all over followed by 1-2 coats of Interdeck.
Unsound Painted Surfaces: Remove all unsound coatings and treat as for new surfaces.
NEW SURFACES: Surface preparation is critical. All preparation for bare substrates is covered on the appropriate primer datasheet.
TIMBER: Apply Yacht Primer.
STEEL: Prime with Yacht Primer or Interprotect.
ALUMINIUM: Prime with Etch Primer followed by either Yacht Primer or Interprotect.
GRP:
Never painted but in new or excellent condition: No priming necessary. Thoroughly degrease with International Surface Prep then rinse with fresh water. Allow to dry. Abrade with 180-220 grade paper.
Never painted and in poor condition: Thoroughly degrease with International Surface Prep then rinse with fresh water. Allow to dry. Abrade with 180-220 grade paper. Apply 1-2 coats of Yacht Primer to seal surface before applying undercoat.
ALL SUBSTRATES: Use Pre-Kote undercoat.
Method:
Sand the undercoat with 180-220 grade wet or dry paper. Remove dust with a dust wipe. Apply 1-2 coats.
Hints:
Mixing- Stir well before use.
Thinner- YTA800 International Enamel Thinners #1.
Cleaner- YTA800 International Enamel Thinners #1.
Ventilation and Humidity Control- Apply in dry, well ventilated conditions.
Other: For best results either stipple by brush or use a mohair roller.
Some Important Points:
Product temperature should be minimum 10°C and maximum 30°C. Ambient temperature should be minimum 5°C/40°F and maximum 35°C/95°F. Substrate temperature should be minimum 5°C/40°F and maximum 35°C/95°F.
Compatibility/Substrates:
Suitable for all substrates and filled surfaces. Not suitable for permanently immersed surfaces. Do not clean with highly alkaline cleaners.
Number of Coats 1-2
Coverage (Theoretical) - 9.50 (m²/lt)
Recommended DFT- 50 microns dry
Recommended WFT- 93 microns wet
Application Methods- Brush, Roller
Visit the International Yacht Paints website via this link for more painting & product advice.
Smart VIP Price Promise
Our prices are very Smart at Smart Marine! Our Smart VIP Membership and committment to great deals makes sure of that, but if you find a lower price, tell us- we will match it!*
Price Promise Terms & Conditions
- Excludes limited time specials, clearances, non-stocked products, overseas websites, price comparison websites and eBay/TradeMe.
- Applies to identical products, in stock in NZ with pricing valid at time of price match request and purchase, with evidence supplied.
- Excluded Products: clearance, run-out, distress, damaged/soiled, parallel imported, non-stocks, trade quotes, commercial quantities, credit account holders, insurance claims, services, typos, overseas websites, price comparison websites, auction websites.
- Free product, offers, sales and promotions cannot be redeemed with price matches.
- The price match applies to the total cost to buy including shipping, taxes and fees.
- Approved Price Promise Matches and purchases can only be redeemed with our store crew. Please contact your closest store with stock.
- Short term finance may not be available with some price matched purchases. Please enquire.
