Reinforced Alkyd Enamel.
Features:
Marine Gloss Enamel is designed for use as the finishing coating for the Single Component Marine topsides system.
Marine Gloss Enamel can also be used :
For signwriting and boot stripes
For up-grading existing enamel systems, subject to correct preparation and undercoating
On canoes, tenders, dinghies, trailer yachts and power boats
Advantages:
High gloss enamel finish
Marine quality
Good weathering properties
Good gloss retention
Good application characteristics
Specification Data:
Generic Type: Polyurethane Modified Gloss Finish
Colour: refer Altex Yacht & Boat Colour Chart
Gloss: High Gloss
Flash Point: 35oC
Thinner: Mineral Turpentine
Storage: Store under cool, dry conditions
Density: 1.21 kg per litre
Volume Solids: 50%
Theoretical Coverage Rate: 10 sq metres per litre at 50 microns dry
Recommended Film Thickness Per Coat: 80-100 microns wet to obtain 40-50 microns dry
Application: Spray, brush or roller
Dry Times (50 µm DFT / 25oC / 50% RH):
Touch Dry : 1½ Hr
Hard Dry : Overnight
Recoat Time (50 µm DFT / 25oC / 50% RH): Recommended : Overnight
SURFACE PREPERATION:
Marine Gloss Enamel is designed to be applied over Marine Surfacer Undercoat. All surfaces must be clean and dry before application of
Marine Gloss Enamel. If the previous coating is aged more than one (1) week it should be thoroughly sanded and/or treated with P40 Prepainting Cleaner prior to application of Marine Gloss Enamel.
DO NOT sand using stearate coated paper as this may adversely affect the adhesion of subsequent coatings.
DIRECTIONS FOR USE:
Mixing:
Marine Gloss Enamel is a single component product that requires thorough mixing and careful thinning before use.
Thinning:
For spray application Marine Gloss Enamel should be thinned 15% to 40% with mineral turpentine. For brush application thin 5% to 15% with mineral turpentine.
Application:
Marine Gloss Enamel may be applied by spray, brush or roller.
Suggested spray equipment is:
Air Spray Graco - Delta Air Spray; 1.1 - 1.4 mm Fluid Nozzle De Vilbiss - JGA gun, E Fluid Nozzle, 704 Air Nozzle, Airless Spray Graco - King 30:1 pump; 0.011-0.013" Fine Finish Tip. (Note : Other equipment equivalent to the above may be used.)
Note: Certain colours may require more than one coat to achieve complete hiding of the substrate.
Clean-up: Use Mineral Turpentine
Smart VIP Price Promise
Our prices are very Smart at Smart Marine! Our Smart VIP Membership and committment to great deals makes sure of that, but if you find a lower price, tell us- we will match it!*
Price Promise Terms & Conditions
- Excludes limited time specials, clearances, non-stocked products, overseas websites, price comparison websites and eBay/TradeMe.
- Applies to identical products, in stock in NZ with pricing valid at time of price match request and purchase, with evidence supplied.
- Excluded Products: clearance, run-out, distress, damaged/soiled, parallel imported, non-stocks, trade quotes, commercial quantities, credit account holders, insurance claims, services, typos, overseas websites, price comparison websites, auction websites.
- Free product, offers, sales and promotions cannot be redeemed with price matches.
- The price match applies to the total cost to buy including shipping, taxes and fees.
- Approved Price Promise Matches and purchases can only be redeemed with our store crew. Please contact your closest store with stock.
- Short term finance may not be available with some price matched purchases. Please enquire.
