Altex Elite Refine 450 2-Pk Brushing Polyurethane - Semi-Gloss White

Regatta Gloss Enamel is designed for use as the finish coating for the Single Component Marine topsides systems.

Above waterline gloss finish without the need for flattening agents.

Elite Refine 450 is recommended for use on all vessel types to repaint:

• Topsides, Cabins & Decks Interiors,
• Masts & Fittings
• Heads & Galleys

Regatta Gloss Enamel can be used on :

• Canoes
• Tenders
• Dinghies
• Trailer yachts
• Power boats
• For signwriting
• Boot stripes
• For up-grading existing enamel systems, subject to correct preparation and undercoating
• Numerous other DIY projects requiring a high quality enamel finish coat

Features:

Elite Refine 450 Semi-Gloss Polyurethane is a specialised marine finish coat. It is based on the sophisticated combination of aliphatic urethanes and urethane reactive acrylic resins, giving a high quality and durable finish coat as well as resistance to moderate/severe marine environments.

It has been especially designed for both the Professional and DIY painter for maintenance repainting of all yachts, launches and other pleasure craft. An easy to use, high performance polyurethane with good flow-out and wet-edge characteristics, balanced with rapid dry-to-touch – makes re-paint projects on the hardstand or on the water a practical proposition.

• Very good resistance to moisture, solvent, and heat
• Excellent durability and colour retention
• Indefinite recoat
• High flexibility and toughness
• Cost-effective, high performance coating solution for any
  aged vessel.
• High performance coating, that looks as good as it
  protects.
• Semi-gloss finish that reduces the appearance of underlying imperfections
  

Limitations of Use:

• Not suitable for use below the waterline on moored
  vessels
• Altex Flattening Paste is not recommended to be mixed
  with this product.

Speciifications:

• Generic Type: Aliphatic Acrylic Polyurethane
• Colour: White and other colours on request. Refer Altex Yacht & Boat Colour Chart for standard colours. https://altexboatpaint.com/assets/pdf/Top%20Coats%20Colour%20Range.pdf. (For more information please talk to one of our Smart Crew).
• Two component kits Mix Ratio: 3 to 1 by volume
• Gloss: Low Sheen
• Theoretical Coverage Rate: 10 sq. metres per litre at 50 microns dry
• Recommended Film Thickness Per Coat: 100 microns wet to obtain 50 microns dry (unthinned)
• Application: Spray, Brush or Roller Dry Times (at 18°C / 50 µm DFT / 50% RH): Touch Dry 90 minutes Hard Dry 24 hours Self Recoat (minimum) 12 hours
• Thinner: Altex Thinning Solvent #25
• Thinning: Thinning is not normally required, however, if required to enhance application properties, thin up to 10% with Altex Thinning Solvent #25. The level of thinning required will depend mainly on material, air, and substrate temperatures, along with humidity and wind velocity. Thin up to 10% with Altex Thinning Solvent #25 to achieve good atomisation if spray applied.
• Pot Life: 3-4 hours at 18°C
• Flash Point: 45°C Setaflash
• Induction Time: 10-15 minutes at 18°C
• Storage: Store under cool, dry conditions
• Shelf Life: Part A: 24 months at 24°C Part B: 12 months at 24°C

For more information, Product Data Sheets and MSDS. Please see https://altexboatpaint.com