Regatta Gloss Enamel is designed for use as the finish coating for the Single Component Marine topsides systems.
Above waterline low sheen finish that does not require a flattening agent.
Altex Elite Refine 250 is recommended for use on all vessel types to repaint:
- Topsides, Cabins & Decks
- Interiors, Masts & Fittings
- Heads & Galleys
Elite Refine 250 Low Sheen Polyurethane is a specialised marine finish coat. It is based on the sophisticated combination of aliphatic urethanes and urethane reactive acrylic resins, giving a high quality and durable finish coat as well as resistance to moderate/severe marine environments.
It has been especially designed for both the Professional and DIY painter for maintenance repainting of all yachts, launches and other pleasure craft. An easy to use, high performance polyurethane with good flow-out and wet-edge characteristics, balanced with rapid dry-to-touch – makes re-paint projects on the hardstand or on the water a practical proposition.
Limitations of Use:
- Not suitable for use below the waterline on moored vessels
- Altex Flattening Paste is not recommended to be mixed with this product.
Speciifications:
- Generic Type: Aliphatic Acrylic Polyurethane
- Colour: White and other colours on request. Refer Altex Yacht & Boat Colour Chart for standard colours. https://altexboatpaint.com/assets/pdf/Top%20Coats%20Colour%20Range.pdf. (For more information please talk to one of our Smart Crew).
- Two component kits Mix Ratio: 3 to 1 by volume
- Gloss: Low Sheen
- Theoretical Coverage Rate: 10 sq. metres per litre at 50 microns dry
- Recommended Film Thickness Per Coat: 100 microns wet to obtain 50 microns dry (unthinned)
- Application: Spray, Brush or Roller Dry Times (at 18°C / 50 µm DFT / 50% RH): Touch Dry 90 minutes Hard Dry 24 hours Self Recoat (minimum) 12 hours
- Thinner: Altex Thinning Solvent #25
- Thinning: Thinning is not normally required, however, if required to enhance application properties, thin up to 10% with Altex Thinning Solvent #25. The level of thinning required will depend mainly on material, air, and substrate temperatures, along with humidity and wind velocity. Thin up to 10% with Altex Thinning Solvent #25 to achieve good atomisation if spray applied.
- Pot Life: 3-4 hours at 18°C
- Flash Point: 45°C Setaflash
- Induction Time: 10-15 minutes at 18°C
- Storage: Store under cool, dry conditions
- Shelf Life: Part A: 24 months at 24°C Part B: 12 months at 24°C
For more information, Product Data Sheets and MSDS. Please see https://altexboatpaint.com
Smart VIP Price Promise
Our prices are very Smart at Smart Marine! Our Smart VIP Membership and committment to great deals makes sure of that, but if you find a lower price, tell us- we will match it!*
Price Promise Terms & Conditions
- Excludes limited time specials, clearances, non-stocked products, overseas websites, price comparison websites and eBay/TradeMe.
- Applies to identical products, in stock in NZ with pricing valid at time of price match request and purchase, with evidence supplied.
- Excluded Products: clearance, run-out, distress, damaged/soiled, parallel imported, non-stocks, trade quotes, commercial quantities, credit account holders, insurance claims, services, typos, overseas websites, price comparison websites, auction websites.
- Free product, offers, sales and promotions cannot be redeemed with price matches.
- The price match applies to the total cost to buy including shipping, taxes and fees.
- Approved Price Promise Matches and purchases can only be redeemed with our store crew. Please contact your closest store with stock.
- Short term finance may not be available with some price matched purchases. Please enquire.
