Daiwa 2023 Saltiga (G) 4000-Xh 6.2 Spinning Reel

Arguably the most sought after and long-awaited release in recent Daiwa history, a small-size SALTIGA is now available. 23 SALTIGA represents the pinnacle of DAIWA engineering progress over the past decade, and features every bit of technology to make the new SALTIGA the best mid-size saltwater spin reel DAIWA has ever produced.

For the first time in a true heavy-duty saltwater reel AIRDRIVE DESIGN is debuted. As was the case with the introduction of AIRDRIVE DESIGN with 22 EXIST, lower start-up inertia was the goal. By redeveloping the shape of the rotor assembly, DAIWA engineers were able to both reduce the weight & maintain the strength, a key consideration for a reel with a pedigree of strength & reliability like SALTIGA.

AIRDRIVE DESIGN doesn't stop there, DAIWA also totally re-engineered the bail assembly of 23 SALTIGA, with a distinct new shape, the bail arm maintains it's hollow tubular stainless steel structure, but is now thinner and lighter than before. The new shape guides the line perfectly into the roller, which has also been redesigned with the implementation of TWISTBUSTER III to reduce line twist even more. All of these features are built upon DAIWA's renowned Monocoque (MQ) body, a solid one-piece aluminium body which enables the fitment of a much larger drive gear, increasing torque & power. It also makes the reel much more impervious to the elements, further sealing the gearcase from saltwater ingress.

DAIWA's MAGSEAL technology in both forms are also equipped, with a MAGSEAL above the pinion gear to stop water ingress from above, and MAGSEAL BEARINGs installed each side of the drive gear to prevent ingress from the handle or handle screw cap.

There's no doubting the importance of a true saltwater mid-size spinning reel in New Zealand conditions, and the new 23 SALTIGA is the best DAIWA has ever produced. Whether you're looking for a new spin reel for offshore soft plastics, slow jigging or casting surface lures over shallow reef flats, the new 23 SALTIGA will be the pinnacle reel in the DAIWA line-up.

Features:

• MONOCOQUE (MQ)
  MQ Body takes reel design to the next level. The MQ system does not require a body cover, instead using an engine plate to screw directly to the body. Eliminating the need for screws to hold a body cover in place. MQ body improves the strength of the reel, it also improves the water-resistance of the body and allows a larger diameter drive gear to be installed.
• ABS-LONGCAST
  Compared to conventional spools, the LC-ABS has been shown to increase the average flight distance by approx. 5% due to its reduced weight and modified shape.
• AIR-BAIL
  Daiwa’s innovative bail design features a hollow tubular stainless steel bail that delivers maximum rigidity and strength with minimum weight. Featuring a smooth protrusion-free design and construction line easily slides unencumbered along the Air Bail towards the line roller for trouble free line control.
• AIR-ROTOR
  Lighter, stronger and more balanced than any rotor system that’s come before, ‘Air Rotor’ delivers a great leap forward in rotor design and function and delivers the ultimate line roller support. Made from Zaion and featuring a redesigned arch that disperses pressure to the lower section of the rotor to reduce stressing and flexing, the design is further enhanced with a hollowed out construction reducing weight, while increasing reel sensitivity and rotational balance.
• ATD-DRAG
  Daiwa’s Automatic Tournament Drag uses an improved drag grease that exhibits a low viscosity at rest, yet becomes more viscous immediately after drag start up. This reduces initial drag start-up inertia and combined with the structural changes of the ATD Drag System results in a smoother drag from the initial hook up.
• CRBB
  Lasting 12 times longer than standard stainless steel bearings Daiwa’s CRBBs feature specially treated stainless steel, and a protective shield on the bearing race that seals out sand, fine grit, salt crystals and other abrasives. The result is a longer lasting bearing that’s protected from the corrosive elements that destroy traditional bearings.
• INFINITE ANTI REVERSE
  Daiwa's advanced system that limits rearward backplay handle movement to almost zero for solid hooksets with less shock to the reel. The result is the elimination of handle slap-back and the unwanted release of line.
• MAGSEALED-BEARINGS
  MagSeal protection is no longer just for the main shaft and rotor of a reel with MagSealed Ball Bearings providing ultimate protection for the most at risk location such as the engine side plate and line roller.
• MAGSEALED-BODY
  Ultimate protection is delivered to the engine room of the reel with a magnetised oil seal located on the main shaft of the reel’s rotor shutting the door to the elements and unwanted intruders. Dust, water, and salt intrusion into the inner workings of a reel are a thing of the past with MagSeal.
• MAGSEALED LINE ROLLER
  One of the hardest working and exposed areas of a spin reel is provided with ultimate protection with a MagSealed line roller bearing shutting out the elements for optimum line roller protection, performance and longevity.
• METAL BALL KNOB
  Providing maximum contact between handle knob and hand, ball knobs are designed for optimal rotation balance, rotation, and functionality.
• SILENT OSCILLATION
  Silent Oscillation combines Digigear drive technology with dampening washes for noise free operation. Increased durability, and a reduction in reel noise are all achieved with Silent Oscillation.

Specifications:

• Bearings 12BB (9CRBB; 2MSBB; 1RB)
• Line Capacity PE #2/300m
• Drag 12kg
• Gear 6.2:1
• Line Pick up 98cm
• Weight 345g