Isotemp 50Ltr 316 Grade Stainless Steel Water Heater 750W - 230V

Awesome 50L, 316 grade stainless steel water heater for boat & motorhomes. 

The luxury of plenty of hot water - for free! Life is a lot easier with a hot water system installed for showers, washing-up and personal hygiene. That little extra comfort, particularly on a cold and damp morning, increases the feeling of well-being for everyone onboard. Install an Isotemp water storage heater and you'll always have plenty of warm water on tap, with no running costs, as all the heat comes from the otherwise wasted engine cooling water!

Isotemp has an exlusive look, with its stainless steel cover, but most important is the internal design. The highest capacity is achieved by the engine water heat exchanger as well as the immersion heater placement. They are positioned in the lowest part of the tank where the water is coldest, to really heat all the water in the tank, which grants an outstanding volume of hot water. The water in- and outlets are also designed for a minimal mixing of cold water into thee hot, by the incoming water. The selected materials are all the best; tank, tubes and all materials in contact with the water are made of acid proof stainless steel AISI 316 and welded with protection gas to eliminate any risk of corrosion. Each water heater is individually leakage tested to 16 bar/230 psi, before delivery. 

25 years of experience from tens of thousands of Isotemp high quality water heaters have been utilized in the design, material and component choices. Isotemp Basic has an exclusive look, with its brushed stainless steel cover, but most important is the internal design. Highest capacity is achieved by the engine water heat exchanger as well as the immersion heater placement. They are positioned in the lowest part of the tank where the water is coldest, to really heat all the water in the tank, which grants an outstanding volume of hot water. The water inlets and outlets are also designed for a minimal mixing of cold water into the hot, by the incoming water.
The selected materials are all the best - tank, tubes and all material in contact with the water are made of acid proof stainless steel AISI 316 and welded with protection gas to eliminate any risk of corrosion. Each water heater is individually leakage tested to 16 bar before delivery.

Can be mounted in a horizontal or vertical position.
Full 2 year warranty and limited 5 year warranty.
Expanded polyurethane foam insulation, for slow heat loss.
Immersion heater element (230 or 115 volt/750 watt) made of copper covered by nickel for a long life.
Immersion heater element mounted to allow internal inspection and cleaning of the tank.
Extra long engine water heat exchanger coil for faster heating.

Special safety valve on 4 bar, with a built-in two-way check valve, which reduces or prevents spill water by expansion.
Simple winter drain.
Double overheat manually re-settable safety thermostat.

Service thermostat set to keep water above 160oF, to prevent the growth of bacteria.
Sturdy mounting straps adjustable 360o for mounting options.
Thermostat mixing valve is standard on USA models.