Goldspar Satin is a quick drying, satin finish yacht varnish that is tough, abrasion resistant and fast drying. Goldspar Satin offers many of the same features as its gloss counterpart but dries to a beautiful satin finish.
PRODUCT DESCRIPTION:
A satin finish polyurethane varnish designed primarily for interior use. Resistant to hot water, mild acids and alkalis. The quick drying formulation minimises dust contamination.
* Fast dry to reduce dust pickup
PRODUCT INFORMATION:
Colour- YVA251-Clear
Finish- Satin
Specific Gravity- 0.9
Volume Solids- 46%
Typical Shelf Life- 2 yrs
VOC (As Supplied)- 425 g/lt
Thinner No.1
Coverage: 3 coats/10.30m2/litre (brush)
Drying-Touch Dry [ISO]:
5ºC: 5hrs
15ºC: 3hrs
23ºC: 1hrs
35ºC: 30mins
Overcoating Substrate Temperature-overcoated with Satin:
5ºC: Min Max 24hrs 4days
15ºC: Min 15hrs, Max 3days
23ºC: Min 6hrs, Max 2days
35ºC: Min 3hrs, Max 1day
Note:If Maximum Recoat Times are exceeded, sand using 320-400 grade (grit) wet or dry paper.
APPLICATION AND USE:
Preparation:
All surfaces to be coated should be clean, dry and free from contamination.
Hints:
Thinner- YTA800 International Enamel Thinners #1.
Cleaner- YTA800 International Enamel Thinners #1.
Ventilation and Humidity Control- Ensure adequate ventilation during use.
Airless Spray Pressure: 176-210 bar. Tip Size: 1365-1580.
Conventional Spray Pressure: 2.3 bar. Tip Size: 1.1-1.4 mm.
Other: For Airmix spray application: Pressure: 2.0 bar. Tip Size: 06-113. For a particularly clear finish use Goldspar gloss for the first 2 or 3 coats and Goldspar Satin only for the final coat.
Some Important Points:
Product temperature should be minimum 15°C/59°F and maximum 35°C/95°F. Ambient temperature should be minimum 5°C/40°F and maximum 35°C/95°F. Substrate temperature should be minimum 5°C/40°F and maximum 35°C/95°F.
Compatibility/Substrates:
Suitable for Timber above the Waterline. For interior use only. May be applied after thinning, to naturally oily timbers such as Teak and Iroko after suitable degreasing.
Number of Coats 2-3
Coverage (Theoretical) - 11.50 (m²/lt)
(Practical) - 10.30 (m²/lt) by brush, 9 m²/lt by spray
Recommended DFT- 40 microns dry
Recommended WFT- 87 microns wet
Application Methods: Brush, Roller, Conventional Spray, Airless Spray, Airmix
Visit the International Yacht Paints website via this link for more painting & product advice.
Smart VIP Price Promise
Our prices are very Smart at Smart Marine! Our Smart VIP Membership and committment to great deals makes sure of that, but if you find a lower price, tell us- we will match it!*
Price Promise Terms & Conditions
- Excludes limited time specials, clearances, non-stocked products, overseas websites, price comparison websites and eBay/TradeMe.
- Applies to identical products, in stock in NZ with pricing valid at time of price match request and purchase, with evidence supplied.
- Excluded Products: clearance, run-out, distress, damaged/soiled, parallel imported, non-stocks, trade quotes, commercial quantities, credit account holders, insurance claims, services, typos, overseas websites, price comparison websites, auction websites.
- Free product, offers, sales and promotions cannot be redeemed with price matches.
- The price match applies to the total cost to buy including shipping, taxes and fees.
- Approved Price Promise Matches and purchases can only be redeemed with our store crew. Please contact your closest store with stock.
- Short term finance may not be available with some price matched purchases. Please enquire.
