Inter Trilux 33 Copper Free Hard Alloy Antifouling- 4 Litres (Black)

Medium performance, hard antifouling.

Suitable for all substrates including aluminium. Offers protection in medium fouling conditions where a hard, scrubbable antifouling is required. It provides a smooth, hard, slippery surface which deters fouling attachment, and can be burnished. Ideal for fast powerboats and craft on dry moorings.

Trilux contains Biolux® which is EXCLUSIVELY available in antifoulings from International. A unique antifouling technology developed by International. It consists of a system of organic boosting biocides incorporated in a highly effective controlled release film. Uses Biolux® Technology to block slime and algae growth.

Cuprous oxide free antifouling.
* Hard, scrubbable surface
* Suitable for all substrates including aluminium
* Easy application
* Range of bright colours
* Quick drying.

For application to hulls below the waterline after suitable priming to help prevent marine growth. Suitable, after the correct priming system has been applied, for use on stern drive units, boot tops, and/or props and shafts. Suitable for all types of craft including high speed types which are used frequently.

Contains Copper Thiocyanate and Preventol A4S.

Coverage: 3.9sq.m/375ml, 7.9sq.m/750ml, 26.3sq.m/2.5lt and 52.6sq.m/5lt.
Application Details - Trilux :

Area- Underwater hull
Finish/Sheen- Light sheen
Thinner: YTA085
Number of Coats: 2-3
Method of application: Airless Spray / Brush / Airmix / Roller
Suitable for high speed craft? YES
Specific Gravity- 1.4
Volume Solids- 46%
VOC (As Supplied)- 472 g/lt

DRYING: Immersion/Touch Dry (ISO)

5°C: 24hrs/1hrs

15°C: 12hrs/45mins

23°C: 8hrs/30mins

35°C: 6hrs/20mins

Note:Max. Immersion Times are as follows: 5-15°C - 3 mths; 23°C - 2 mths; 35°C - 1 mth.

Overcoating Substrate Temperature-Overcoated by Trilux: Min/Max

5°C: 16hrs/ext

15°C: 10hrs/ext

23°C: 6hrs/ext

35°C: 4hrs/ext

APPLICATION AND USE:
Preparation- All substrates must be clean, dry and free from contaminants. All surfaces should have been primed with the appropriate primers. Suggested primers: Interprotect® (two pack) , Yacht Primer or Primocon (single packs).

Method: Apply 2 coats per season on the hull. 3 coats are required on the leading and trailing edges, waterline, rudder and keel. This is important for best performance.

Hints:

Thinner- International Antifouling Thinner #3
Thinning- Do not thin unless absolutely necessary.
Cleaner- International Antifouling Thinner #3
Ventilation and Humidity Control- Ensure adequate ventilation during use.
Airless Spray Pressure: 176-210 bar. Tip Size: 2180.
Other:

For Airmix spray application: Pressure: 2.5 bar. Tip Size: 20-113. True colour will develop after immersion. For in season maintenance wipe surface with a soft sponge or equivalent. Heavy cleaning operations on a regular basis may remove some paint leading to a reduction of the in-service life of the coating. To prevent premature failure, ensure correct amount of paint is applied using the coverage as a guide.

Some Important Points: Product temperature should be minimum -5°C and maximum 35°C. Ambient temperature should be minimum -5°C and maximum 35°C. Substrate temperature should be 3°C/5°F above dew point and maximum 35°C/95°F.

Compatibility/Substrates: GRP, Wood, Steel/Iron, Lead. For use on Aluminium/Alloy, Zinc-sprayed Surfaces and Lead.

Number of Coats: 2-3

Coverage (Theoretical) - 11.60 (m²/lt) by brush, 3.75 m²/lt by spray.

(Practical) - 10.50 (m²/lt) by brush; 3.0 m²/lt spray.

Recommended DFT- 122 microns dry / 40 microns dry

Recommended WFT- 266 microns wet / 86 microns wet

Application Methods- Airless Spray, Brush, Airmix,