Altex Elite 321 2-Pk Brushing Polyurethane - Spindrift White 1L

{{ getFromPrefix }} SMART VIP CARD PRICE

Mix 'N' Match Deal: Buy {{ selectedOption.mixnMatch.quantity }} + and save {{ selectedOption.mixnMatch.price }}% {{ selectedOption.mixnMatch.quantity }} x for {{ selectedOption.mixnMatch.description }}

Serves: {{selectedOption.serves}} ( per serve)

save {{ selectedOption.saleSavingsPercent }}%

{{product.options[0].name}}

{{packitem.quantity}} x {{packitem.item.name}} {{packitem.options[0].name}}

- +

Stock Notification

Item excluded from freight specials
$14.99 Dangerous Goods North Island
$29.98 Dangerous Goods South Island

For Rural Deliveries please read Shipping T&Cs – Click Here

Store Availability

{{b.name}} Low Stock In Stock Out of Stock
Select a variation to see branch availability
SKU #

Elite® 321 Brushing Polyurethane is a specialised marine finish coat formulated for brush and roller application. It is based on the latest cyclo-aliphatic polyester technology, giving a high quality and durable finish coat with long lasting gloss.

Elite® 321 Brushing Polyurethane has been especially designed for both the Professional and DIY painter for maintenance repainting of all yachts, launches and other pleasure craft.

Elite® 321 Brushing Polyurethane is recommended for use on all vessel types to repaint:

  • Topsides, Cabins & Decks
  • Interiors, Masts & Fittings
  • Showers, Heads & Galleys

May also be utilised on a wide range of equipment and / or vehicles:

  • Horsefloats
  • Caravans
  • Campervans

Elite® 321 Brushing Polyurethane allows a competent brush painter to restore his boat to a high level of finish and performance for a fraction of the price of a professional job.

Specifications:

  • Colour: Plimsoll White
  • Mix Ratio: 3 to 1 by volume
  • Gloss: High Gloss
  • Thinner: Use Altex Thinning Solvent #22
  • Pot Life (at 25oC): 5 hours
  • Induction Time: 15 minutes at 25°C
  • Theoretical Coverage Rate: 11.2 sq. metres per litre at 50 microns dry
  • Recommended Film Thickness Per Coat: 90 microns wet to obtain 50 microns dry (un-thinned)
  • Application: Brush or Roller – Rolling + Brush Tip-off Recommended
  • Dry Times (at 25°C / 50 µm DFT / 50% RH): Touch Dry 1¾ hours. Hard Dry 16 - 24 hours. Self Recoat 4 hours minimum. 24 hours maximum without fine sanding (see note below)


Note: If recoating is required after more than 24 hours, carefully matt the surface using a fine grade (approx. 380 - 600grit) sand paper, wet-and-dry or Scotchbrite® pad (fine Green grade) DO NOT sand using lubricated (stearate coated) paper.


For more information, Product Data Sheets and MSDS. Please see https://altexboatpaint.com

Smart VIP Price Promise

Our prices are very Smart at Smart Marine! Our Smart VIP Membership and committment to great deals makes sure of that, but if you find a lower price, tell us- we will match it!*

Price Promise Terms & Conditions

  • Excludes limited time specials, clearances, non-stocked products, overseas websites, price comparison websites and eBay/TradeMe.
  • Applies to identical products, in stock in NZ with pricing valid at time of price match request and purchase, with evidence supplied.
  • Excluded Products: clearance, run-out, distress, damaged/soiled, parallel imported, non-stocks, trade quotes, commercial quantities, credit account holders, insurance claims, services, typos, overseas websites, price comparison websites, auction websites.
  • Free product, offers, sales and promotions cannot be redeemed with price matches.
  • The price match applies to the total cost to buy including shipping, taxes and fees.
  • Approved Price Promise Matches and purchases can only be redeemed with our store crew. Please contact your closest store with stock.
  • Short term finance may not be available with some price matched purchases. Please enquire.
Write Review

Elite 321 2-Pk Brushing Polyurethane - Spindrift White 1L Reviews

There are not yet any reviews on this product.

Subscribe for Special Offers

Sign up successful!