One-pack, easy to use undercoat.
Product Description:
Prekote is a white, one-pack, easy to use undercoat with excellent covering power and easy sanding properties.
Do not apply two-pack systems over this product.
Do not use on areas that are permanently immersed.
Application Details - Prekote :
Area- Above the waterline
Finish/Sheen Low sheen
Thinners: International Retarder Thinners #9, YTA064 International Polyurethane Spraying Thinners #10
Number of Coats: As required
Method of application: Brush / Roller / Conventional Spray / Airless Spray / Airmix
Specific Gravity 1.5
Volume Solids 51%
PRODUCT DESCRIPTION:
Single pack, marine grade undercoat suitable, after priming has been carried out, for Polyester, Vinylester, Epoxy, Steel, Aluminium, Ferro Cement and Timber hulls above the waterline prior to application of single pack finish coats.
* Good opacity
* Easy application
* Easy sanding
* Easy clean up
DRYING- Touch Dry [ISO]:
5ºC: 16hrs
15ºC: 12hrs
23ºC: 6hrs
35ºC: 2hrs
Overcoating Substrate Temperature: Min/Max
Brightside/Interdeck:
5ºC: 72hrs/6days
15ºC: 36hrs/4days
23ºC: 24hrs/2days
35ºC: 12hrs/1days
Prekote:
5ºC: 48hrs/6days
15ºC: 24hrs/4days
23ºC: 16hrs/2days
35ºC: 8hrs/1days
Note:If maximum overcoating times are exceeded, sand using 280-320 grade (grit) wet or dry paper.
APPLICATION AND USE:
Preparation: All surfaces to be coated should be clean, dry and free from contamination.
Hints: Thinner YTA800 International Enamel Thinners #1.
Cleaner YTA800 International Enamel Thinners #1.
Ventilation and Humidity Control Ensure adequate ventilation during use.
Airless Spray Pressure: 176 bar. Tip Size: 1365-1580.
Conventional Spray Pressure: 2.3 bar. Tip Size: 1.3-1.5 mm.
Other For Airmix spray application: Pressure: 2.5 bar. Tip Size: 09-113 For best performance temperature should be above 10°C.
Some Important Points:
Product temperature should be minimum 10°C and maximum 30°C. Ambient temperature should be minimum 5°C/40°F and maximum 35°C/95°F. Substrate temperature should be minimum 5°C/40°F and maximum 35°C/95°F.
Compatibility/Substrates: Suitable for all substrates and filled surfaces.
Number of Coats- As required
Coverage (Theoretical) - 10.00 (m²/lt) by brush
(Practical) - 9.00 (m²/lt) by brush, 8 m²/lt by spray
Recommended DFT 51 microns dry
Recommended WFT 100 microns wet
Application Methods: Brush, Roller, Conventional Spray, Airless Spray, Airmix
Visit the International Yacht Paints website via this link for more painting & product advice.
Smart VIP Price Promise
Our prices are very Smart at Smart Marine! Our Smart VIP Membership and committment to great deals makes sure of that, but if you find a lower price, tell us- we will match it!*
Price Promise Terms & Conditions
- Excludes limited time specials, clearances, non-stocked products, overseas websites, price comparison websites and eBay/TradeMe.
- Applies to identical products, in stock in NZ with pricing valid at time of price match request and purchase, with evidence supplied.
- Excluded Products: clearance, run-out, distress, damaged/soiled, parallel imported, non-stocks, trade quotes, commercial quantities, credit account holders, insurance claims, services, typos, overseas websites, price comparison websites, auction websites.
- Free product, offers, sales and promotions cannot be redeemed with price matches.
- The price match applies to the total cost to buy including shipping, taxes and fees.
- Approved Price Promise Matches and purchases can only be redeemed with our store crew. Please contact your closest store with stock.
- Short term finance may not be available with some price matched purchases. Please enquire.
