Inter Pa10 1-Pk Metal Etch Primer Red Oxide 1 Litre

{{ getFromPrefix }} SMART VIP CARD PRICE

Mix 'N' Match Deal: Buy {{ selectedOption.mixnMatch.quantity }} + and save {{ selectedOption.mixnMatch.price }}% {{ selectedOption.mixnMatch.quantity }} x for {{ selectedOption.mixnMatch.description }}

Serves: {{selectedOption.serves}} ( per serve)

save {{ selectedOption.saleSavingsPercent }}%

{{product.options[0].name}}

{{packitem.quantity}} x {{packitem.item.name}} {{packitem.options[0].name}}

- +

Stock Notification

Standard NZ $9.99 per order shipping deal, qualifies for FREE shipping for order totals over NZ $200.00

For Rural Deliveries please read Shipping T&Cs – Click Here

Store Availability

{{b.name}} Low Stock In Stock Out of Stock
Select a variation to see branch availability
SKU #

Primocon is a fast drying, one-part primer for use below the water line before antifouling is applied. Formulated for timber, steel, aluminium, cast iron keels and lead keels.

Also very suitable as a sealing primer over clean sanded old antifouls and coatings and can be re-coated easily after long periods.

Thinner No.3 (up to 5% brushing )

Features:

  • An aluminium pigmented, vinyl anti-corrosive primer than can be recoated with itself after long periods
  • Quick drying even in poor conditions
  • Can be applied by brush, roller or spray


Specifications:

  • Products Theoretical Coverage: ~ 7.4 m²/lt using applications tools such as brush or roller
  • Actual Coverage For This Sized Product: 29.60 mt²
  • Area: Below the Waterline
  • Finish/sheen: Low Gloss
  • Colour: Grey
  • Size: 4 Litre
  • Substrates: Aluminium, Zinc-Galvanised Steel, Epoxy Composite, Carbon Fibre, GRP / FRP, Lead, Steel, Wood
  • Application Tools: Brush, Roller


Preperation and Application Conditions:

  • Ensure you are in a safe working enviroment with proper ventillation and safety/protective gear on your persons
  • Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation
  • The film formation may be adversely affected by light rain, high humidity and/or condensation during application
  • In confined spaces provide adequate ventilation during application and drying
  • In Good Condition Remove all loose material, fouling deposits and any leached layer. Rinse with fresh water and
    allow to dry.
    In Poor Condition Remove back to sound primers using either suitable chemical strippers or mechanical methods.
    Caution: NEVER dry sand antifoulings.
  • Any following application methods will depend on what substrate Primocon is applied to - Refer to the Product Data Sheet linked below for exact application methods

Touch Dry - Time/Temp:
1 hrs - 35°C (95°F)
1 hrs - 23°C (73°F)
1 hrs - 15°C (59°F) 
1.5 hrs - 5°C (41°F)


The product data provided above is intended as a general overview to aid product selection and as such represents typical values.
For more specific application guidance and/or safety related information and procedures, please refer to the product datasheets provided:

Product data sheet:
https://www.international-yachtpaint.com/s3/documents/TDS/Primocon_AP_eng_A4_20190605.pdf

Safety data sheet:
https://s3-eu-west-1.amazonaws.com/akzonobel-live/documents/SDS/YPA984_E1_AUS_eng.pdf?mtime=20170914095533

**SHIPPING PRICE IS FOR NORTH ISLAND SHIPPING ONLY, INCLUDING AUCKLAND** Auckland we recommend collection if possible.
SOUTH ISLAND SHIPPING: Please contact the Smart Crew for a shipping quote to your address.
SORRY, THIS ITEM CANNOT BE ORDERED ONLINE TO THE SOUTH ISLAND. The shipping price is for North Island delivery only.

Smart VIP Price Promise

Our prices are very Smart at Smart Marine! Our Smart VIP Membership and committment to great deals makes sure of that, but if you find a lower price, tell us- we will match it!*

Price Promise Terms & Conditions

  • Excludes limited time specials, clearances, non-stocked products, overseas websites, price comparison websites and eBay/TradeMe.
  • Applies to identical products, in stock in NZ with pricing valid at time of price match request and purchase, with evidence supplied.
  • Excluded Products: clearance, run-out, distress, damaged/soiled, parallel imported, non-stocks, trade quotes, commercial quantities, credit account holders, insurance claims, services, typos, overseas websites, price comparison websites, auction websites.
  • Free product, offers, sales and promotions cannot be redeemed with price matches.
  • The price match applies to the total cost to buy including shipping, taxes and fees.
  • Approved Price Promise Matches and purchases can only be redeemed with our store crew. Please contact your closest store with stock.
  • Short term finance may not be available with some price matched purchases. Please enquire.
Write Review

Pa10 1-Pk Metal Etch Primer Red Oxide 1 Litre Reviews

There are not yet any reviews on this product.

Subscribe for Special Offers

Sign up successful!