View all »

Browse by brand

- click logo for brand listings
  • A3

Inter Epiglue Epoxy - 1.57kg - Pop Top

Suitable for use above and below the waterline.
Inter Epiglue Epoxy - 1.57kg - Pop Topclick for larger image
back to listings
Smart VIP Card PriceNZ $169.99Save 15%Without Card NZ $199.90Product #34254

Suitable for use above and below the waterline.

Epiglass Epiglue is a high performance marine and general performance epoxy resin adhesive. Its thixotropic nature enables it to be used for both close contact and gap filling joints. It offers a virtually colourless glue line once cured.

A thixotropic high performance two pack modified epoxy polyamide adhesive.
* Thixotropic giving no sag
* Virtually colourless glue line
* Hard tough cured glue line
* May be used for gap filling and close contact type joints
* Smooth and easy to mix

Colour- YAA950-Amber Cured film is light amber.
Specific Gravity- 1.1
Volume Solids- 100%
Mix Ratio 2:1 by volume (as supplied)
Application: Number of Coats: 1
Method of application: Trowel / Knife

Supplied with hardner.


10ºC: 14days

15ºC: 7days

23ºC: 7days

35ºC: 5days

Preparation All substrates must be clean, dry and free from contaminants.


Mixing- Mix the two components thoroughly to an even colour. Note that pop tops have a shortened pot life at higher temperatures compared to the standard hardener.
Thinning- Do not thin.
Cleaner- YTA061 International Epoxy Thinners #7. Clean before product has started to gel. Once cured, the product is very difficult to remove.
Ventilation and Humidity Control- Ensure adequate ventilation during use.
Other- Note the different curing and application temperature ranges for the two grades of hardener available. Clamping times suggested are a guide only. Joints under high stress should be left for longer periods.

Some Important Points:

Avoid high clamping pressures as starved glue joints may result. Do not use below 5°C. Product temperature should be minimum 5°C and maximum 25°C. Ambient temperature should be minimum 5°C/40°F and maximum 35°C/95°F. Substrate temperature should be minimum 5°C and maximum 30°C.

Compatibility/Substrates- Not suitable for use with some pretreated timbers.

Number of Coats 1- Apply glue to both faces being joined.

Coverage (Theoretical) - 2.00 (m²/lt) For a 0.5 mm glue line.

Recommended- DFT

Application Methods- Trowel, Knife / Spatula

Shipping: Smart Marine uses Courier Post and Toll to deliver our NZ orders. All parcels are insured plus you will receive online trace details for peace of mind. Due to insurance and guarantee of delivery, all our parcels will need to be signed for or the courier will leave a card to collect/arrange another delivery time so please consider supplying a business address instead or another where the parcel can be signed for. Orders are processed on week days and are usually collected the next business morning by the courier, if not earlier. North Island delivery is usually 1-3 days, South Island 2-5 and the parcel size can effect this. We also ship to rural addresses and to P.O. boxes but very large/fragile/DG parcels will need a physical address.

Collect Your Order at any Smart Marine Store: Smart Marine happily allows collection of your order (pre-pay online or pay in store), 8am-6pm, 7 days a week via your favourite Smart Marine store: Westhaven, Mt Wellington, Manukau or Hamilton. Simply 'Add to Cart' as normal and select the store you want to collect from via the drop-down options at check-out. The Smart Web Crew will be in touch with when it is ready for you. Easy-peasy! Please let us know when you hope to collect so we can do our best to have it ready for you in good time. You will be required to present your own photo i.d. for pre-paid orders so please bring this with you.

Please click here to view full shipping terms and International Shipping details of required.

**Please Note: ships overseas web orders outside of New Zealand to these countries only: Cook Islands, Fiji, French Polynesia, New Caledonia, Niue, Samoa, Tahiti, Tonga, Vanuatu, Wallis & Fortuna.

Satisfaction Assured! Money Back Gaurantee!

We believe you will be very satisfied with your purchase from Smart Marine.

You are however welcome to return the item if required for exchange or refund excluding shipping costs within 10 days and in its original condition and packaging if you no longer require the item.

On the rare occasion that a product is found to be faulty under warranty or not as described, please contact the Smart Crew and we will promptly remedy the issue for you. If you have any queries regarding items on the SmartWeb or concerns with your purchase, please feel free to contact the Smart Crew for help.

Smart Marine aims to abide and exceed the requirements set by the New Zealand Fair Trading and Consumer Guarantees Act to ensure you have a Smart Shopping Experience!