BOATING
View all »

Browse by brand

- click logo for brand listings
  • OTHER
  • SHIMANO
  • BLACK BART
  • BLACK MAGIC
  • WEBER
  • CATCH
  • HOLIDAY
  • A3
  • TROJAN
  • OCEANSOUTH
  • OCEAN ANGLER
  • GRAND PACIFIC
  • BERKLEY
  • NARVA
  • NOMAD
  • DAIWA
  • COLUMBIA
  • CROCS
  • DOMETIC
  • LOWRANCE

Tenob OU01 Rise & Fall Auxillery Outboard Motor Bracket to 25HP -Transom Mt

316 grade stainless steel, made in new Zealand!
Tenob OU01 Rise & Fall Auxillery Outboard Motor Bracket to 25HP -Transom Mtclick for larger image
  • Tenob OU01 Rise & Fall Auxillery Outboard Motor Bracket to 25HP -Transom Mt
  • Tenob OU01 Rise & Fall Auxillery Outboard Motor Bracket to 25HP -Transom Mt
  • Tenob OU01 Rise & Fall Auxillery Outboard Motor Bracket to 25HP -Transom Mt
  • Tenob OU01 Rise & Fall Auxillery Outboard Motor Bracket to 25HP -Transom Mt
  • Tenob OU01 Rise & Fall Auxillery Outboard Motor Bracket to 25HP -Transom Mt
back to listings
Smart VIP Card PriceNZ $539.00Save 10%Without Card NZ $599.00Product #64121

316 grade stainless steel, made in new Zealand!

Tenob OU01 25hp Stainless Steel Transom Fit Rise & Fall Bracket:

New Zealand's most popular outboard motor mounting bracket for over 36 years.  Superior construction means that it is possible to have a motor mounted on this bracket while towing your boat on the road. No parts to come loose or fall off due to use of pressed stainless steel pivots and shake-proof fasteners.

Made in NZ. Lifetime polished marine grade 3mm stainless steel.

25hp (18kw) maximum standard & 20hp max. long (20-23") shaft models. 58kg max. weight. Applies to both 2 and 4 stroke motors.

Hole centres 152mm vertical x 207mm horizontal (approx.). Bracket size: 350mm (reach) x 280mm (mounting width) x 215mm (mounting height).

Vertical movement (adjustment) 340mm (13.3/8").  In its lowest position the top edge of the timber is 83mm below horizontal.

Timber size: 260 x 190 x 35mm. Varnished hardwood. Hardwood is an ideal material because the outboard motor clamps sink slightly into the surface, thus reducing the risk of the motor slipping off.  This cannot be achieved with plastic mounts.

For additional lift assistance refer to "Large Spring Set" code OU03.

Mounting instructions:  The bracket is designed to lift the motor clear of the water when not in use.

1. Locate the bracket in the raised position so the motor skeg is clear of the water.  Mark the bolt holes in this raised postion.

2. Check that, when the motor is 340mm lower, the propellor is at sufficient depth in the water.

3. Mount as close to the centreline as practicable, without interfering with the main motor, rudder etc.

4. The port (LH) side if often preferable for better weight distribution and ease of operation.  The motor weight is offset by the helmsman's weight on the starboard side.  The steering tiller is normally on the port side.

5. Use four 3/8" or 10mm stainless steel bolts with eight large diameter (and preferably thick) washers.  It may be necessary to reinforce the transom with a backing plate or pads.  They can be made from marine plywood or aluminium for example.  Mount them on the inside of the transom.

Warning: During installation do not attempt to operate the bracket before it is solidly mounted or the two large springs are temporarily removed.  Ignoring this warning could result in serious injury. 

Shipping: Smart Marine uses Courier Post and Toll to deliver our NZ orders. All parcels are insured plus you will receive online trace details for peace of mind. Due to insurance and guarantee of delivery, all our parcels will need to be signed for or the courier will leave a card to collect/arrange another delivery time so please consider supplying a business address instead or another where the parcel can be signed for. Orders are processed on week days and are usually collected the next business morning by the courier, if not earlier. North Island delivery is usually 1-3 days, South Island 2-5 and the parcel size can effect this. We also ship to rural addresses and to P.O. boxes but very large/fragile/DG parcels will need a physical address.

Collect Your Order at any Smart Marine Store: Smart Marine happily allows collection of your order (pre-pay online or pay in store), 8am-6pm, 7 days a week via your favourite Smart Marine store: Westhaven, Mt Wellington, Manukau or Hamilton. Simply 'Add to Cart' as normal and select the store you want to collect from via the drop-down options at check-out. The Smart Web Crew will be in touch with when it is ready for you. Easy-peasy! Please let us know when you hope to collect so we can do our best to have it ready for you in good time. You will be required to present your own photo i.d. for pre-paid orders so please bring this with you.

Please click here to view full shipping terms and International Shipping details of required.

**Please Note: smartmarine.co.nz ships overseas web orders outside of New Zealand to these countries only: Cook Islands, Fiji, French Polynesia, New Caledonia, Niue, Samoa, Tahiti, Tonga, Vanuatu, Wallis & Fortuna.

Satisfaction Assured! Money Back Gaurantee!

We believe you will be very satisfied with your purchase from Smart Marine.

You are however welcome to return the item if required for exchange or refund excluding shipping costs within 10 days and in its original condition and packaging if you no longer require the item.

On the rare occasion that a product is found to be faulty under warranty or not as described, please contact the Smart Crew and we will promptly remedy the issue for you. If you have any queries regarding items on the SmartWeb or concerns with your purchase, please feel free to contact the Smart Crew for help.

Smart Marine aims to abide and exceed the requirements set by the New Zealand Fair Trading and Consumer Guarantees Act to ensure you have a Smart Shopping Experience!